Ipx sap-multiplier, Command mode, Description – Avaya P580 User Manual
Page 291: Syntax, Sample output, Systems, Ipx sap-multiplier -25
Document No. 10-300090, Issue 1
13-25
IPX
ipx sap-multiplier
Command Mode
Interface Configuration.
Description
Sets the interval at which a network or server’s SAP entry ages out. The no
form of this command restores the default, which is three times the SAP
update interval.
Syntax
Sample Output
The following example sets the interval at which the SAP entry goes out to
20 on an interface labeled “boston”.
(config-if:boston)#
ipx sap-multiplier 20
Systems
P550R, P580, P880, and P882.
To Configure:
ipx sap-multiplier <multiplier>
To Restore Default:
[no] ipx sap-multiplier
Table 13-10. Parameters, Keywords, Arguments
Name
Definition
<multiplier>
The multiplier used to calculate the interval SAP routing table
entries age out. This can be any positive number.
The value you specify is multiplied by the SAP update interval
to determine the aging-out interval.