Sample output, Systems – Avaya P580 User Manual
Page 295
Document No. 10-300090, Issue 1
13-29
IPX
Sample Output
The following example:
■
sets the SAP name filter precedence to 1
■
sets the filter-network to 3
■
sets the service-type to 2
■
applies filters to SAP packets in both directions (both)
■
adds the service to the service table (allow)
■
sets the filter hops to 4
on an interface labeled “boston”.
(config-if:boston)#
ipx sap-network-filter 1 3 2 both allow 4
Systems
P550R, P580, P880, and P882.
{filter | allow}
The action to take for the IPX service.
• filter - Do not add the service to the service table
(inbound SAP packets) or do not advertise the service
(outbound SAP packets).
• allow - Add the service to the service table (inbound
SAP packets) or advertise the service (outbound SAP
packets).
<filter-hops>
The number of hops to get to the service in the service table
(inbound SAP packets) or in the advertised information
(outbound SAP packets). The range is 0 to 16 hops.
Table 13-12. Parameters, Keywords, Arguments
Name
Definition
2 of 2