Avaya P580 - Manual (Page 298)

Chapter 13
13-32 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ipx service
Command Mode Global Configuration.
Description Specifies static SAP entries. To remove static SAP entries, use the no form
of this command. The default is that no static services are defined.
Syntax
To
Configure: ipx service <service-type> <service-name> <network>
<node> <socket> <network.next-hop-node> [<hops>]
To Disable: [no] ipx service <service-type> <service-name>
Table 13-15. Parameters, Keywords, Arguments
Name Definition
<service-type> The number of the type of the service. The range is 0-FFFF.
<service-name> Name of the server that provides the service. The range is 1 to
47 bytes long.
<network> An eight-digit hexadecimal number that uniquely identifies a
network cable segment. It can be a number in the range 1 to
FFFFFFFD. You do not need to specify leading zeros in the
network number. For example, for the network number
000000AA you can enter AA.
<node> The node number of the target Novell server. This is a 48-bit
value represented by a MAC address (aa:bb:cc:dd:ee:ff).
<socket> The socket number for this service. The range is 0 - FFFF
<network.next-
hop-node> Network number and node address of the next hop to the
server.
<next-hop-node> - The argument node is the node number of
the target Novell server. This is a 48-bit value represented by
a MAC address (aa:bb:cc:dd:ee:ff).
<hops> Number of hops to the server. The range is 1-16.