Avaya P580 - Manual (Page 307)

Document No. 10-300090, Issue 1 13-41
IPX
show ipx route
Command Mode User.
Description Displays the contents of the IPX Routing Table.
Syntax show ipx route [{<network> | default}]
Sample Output The following is an example of the output that displays after you enter the
show ipx route command.
Codes: C - Connected primary network, S -
Static, R - RIP
s - seconds
7 Total IPX routes.
IPX default route known
C 100 (Ethernet 802.3), 100
C 1001 (Ethernet II), 1001
C 1002 (Ethernet 802.2), 1002
C 1003 (Ethernet SNAP), 1003
C 10005129(Ethernet SNAP), 10005129
R AAAAAAAA[2/2] via
10005129.00:c0:4f:ae:6b:6d, 10005129
S FFFFFFFFvia 100.02:e0:3b:00:45:63, 100
Systems P550R, P580, P880, and P882.
Table 13-20. Parameters, Keywords, Arguments
Name Definition
<network> The number of the network whose routing table entry you want
to display. This is an eight-digit hexadecimal number that
uniquely identifies a network cable segment. It can be a number
in the range 1 to FFFFFFFD. You do not need to specify
leading zeros in the network number. For example, for the
network number 000000AA, you can enter AA.
default Displays the default route. This is equivalent to specifying a
value of FFFFFFFE for the argument network.