Avaya P580 - Manual (Page 363)

Document No. 10-300090, Issue 1 17-3
Module
set module name
Command Mode Global Configuration.
Description Creates the name for a module. Omitting the <mod-name> variable clears
the module name.
Syntax set module name <mod-num> [<mod-name>]
Sample Output The following example creates the name of the module in slot 3.
(configure)# set module name 3 "MIS dept module"
Module 3 name set
Systems P550R, P580, P880, and P882.
Table 17-2. Parameters, Keywords, Arguments
Name Definition
<mod-num> Specifies the number of the module whose name is to be
cleared or set.
<mod-name> Specifies the name of the module. If the module name is not
specified, any previous name for the module is cleared.