Set huntgroup internal-error-shutdown, Command mode, Description – Avaya P580 User Manual
Page 368: Syntax, Sample output, Systems, Set huntgroup internal-error-shutdown -2
Chapter 18
18-2
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set huntgroup internal-error-shutdown
Command Mode
Global Configuration.
Description
Globally enables or disables internal error detection and recovery (IEDR)
for all ports in hunt groups.
* Note:
All ports that have IEDR enabled, whether they are
administratively disabled or enabled, assume the hunt group
IEDR setting if they are placed in a hunt group. If a port has
IEDR enabled before you place it in a hunt group, the show
port internal-error-config command displays the port as
IEDR-enabled regardless of the huntgroup IEDR setting.
However, the port in fact assumes the hunt group IEDR setting
(whatever that setting is).
Syntax
Sample Output
The following example globally enables IEDR on all ports on a huntgroup.
(configure)#
set huntgroup internal-error-shutdown enable
Systems
P550R, P580, P880, and P882.
To Enable:
set huntgroup internal-error-shutdown enable
To Disable:
set huntgroup internal-error-shutdown disable