Area ase-filter, Command mode, Description – Avaya P580 User Manual
Page 380: Syntax, Sample output, Systems, Area ase-filter -4
Advertising
Chapter 19
19-4
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
area ase-filter
Command Mode
OSPF Router Configuration.
Description
Enables the filtering of type 3 ASE LSAs into an OSPF Area. To disable the
filtering of type 3 ASE LSAs, use the no form of this command.
Syntax
Sample Output
The following command enables filtering of type 3 ASE LSAs into the
indicated OSPF Area.
(configure router:ospf)#
area 2.0.0.0 ase-filter
Systems
P550R, P580, P880, and P882.
To Enable:
area <area-id> ase-filter
To Disable:
[no] area <area-id> ase-filter
Table 19-2. Parameters, Keywords, Arguments
Name
Definition
<area-id>
IP address that represents the area-id for the system.
Advertising
This manual is related to the following products: