Area stub, Command mode, Description – Avaya P580 User Manual
Page 384: Syntax, Sample output, Systems, Area stub -8
Advertising
Chapter 19
19-8
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
area stub
Command Mode
OSPF Router Configuration.
Description
Defines an area as a stub area. Use the no form of this command to remove
the stub area distinction.
Syntax
Sample Output
The following command removes a stub area on the indicated area.
(configure router:ospf)#
no area 2.0.0.0 stub
Systems
P550R, P580, P880, and P882.
To Enable:
area <area-id> stub
To Disable:
[no] area <area-id> stub
Table 19-6. Parameters, Keywords, Arguments
Name
Definition
<area-id>
IP address that represents the area-id for the system.
Advertising
This manual is related to the following products: