Show aft instance, Command mode, Description – Avaya P580 User Manual
Page 40: Syntax, Sample output, Systems, Show aft instance -16
Chapter 2
2-16
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
show aft instance
Command Mode
User.
Description
Displays the AFT instance for a particular VLAN or show all AFT instances
for all VLANs. If no VLAN parameter is specified, all instances show on
the switch.
Syntax
show aft instance [vlan {<vlan-id> | name <vlan-name>}]
Sample Output
The following example displays the aft instance configuration table.
>
show aft instance
AFT Instance Configuration:
===========================
Instance for Vlan “Default” (vlanID 1)
AutoSizeHT: true
UseConfHTsize: false
KeepInvalidInCol: false
UseInvalidInBktSizing: true
KeepInvalidInBkt: false
ConfigHTsize: 1024
Instance for Vlan “Discard” (vlanID 4097)
AutoSizeHT: false
UseConfHTsize: false
KeepInvalidInCol: false
UseInvalidInBktSizing: true
KeepInvalidInBkt: false
ConfigHTsize: 1
Systems
P550R, P580, P880, and P882.
Table 2-10. Parameters, Keywords, Arguments
Name
Definition
<vlan-id>
Specifies the aft instance associated with the ID of this VLAN.
Displays the AFT instance information for this VLAN ID.
<vlan-
name>
Displays the AFT Instance information for the VLAN identified
by “name”.