Ip ospf retransmit-interval, Command mode, Description – Avaya P580 User Manual
Page 400: Syntax, Sample output, Systems, Ip ospf retransmit-interval -24
Chapter 19
19-24
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip ospf retransmit-interval
Command Mode
Interface Configuration.
Description
Specifies the time between link state advertisement retransmissions for
adjacencies belonging to the interface. The no command restores the default
setting. The value range is 1-3600. The default is 5.
Syntax
Sample Output
The following command specifies the time retransmit interval time on
interface 123 to 2000 seconds.
(config-if:123)#
ip ospf retransmit-interval 2000
Systems
P550R, P580, P880, and P882.
To Configure:
ip ospf retransmit-interval <seconds>
To Restore Default:
[no] ip ospf retransmit-interval
Table 19-16. Parameters, Keywords, Arguments
Name
Definition
<seconds>
Time in seconds between retransmissions. It must be greater
than the expected round-trip delay between any two routers on
the attached network. The range is 1 to 3600 seconds. The
default is 5 seconds.