Passive-interface, Command mode, Description – Avaya P580 User Manual
Page 404: Syntax, Sample output, Systems, Passive-interface -28
Chapter 19
19-28
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
passive-interface
Command Mode
OSPF Router Configuration.
Description
Prevents OSPF from sending routing updates across the network. To disable
passive interface, use the no form of this command.
Syntax
Sample Output
The following command enables passive interface on the interface labeled
boston with an ip address of 10.0.7.123.
(configure router:ospf)#
passive-interface boston 10.0.7.123
Systems
P550R, P580, P880, and P882.
To Enable:
passive-interface {<interface-name> | <ip-address>}
To Disable:
[no] passive-interface {<interface-name> | <ip-
address>}
Table 19-20. Parameters, Keywords, Arguments
Name
Definition
<interface-name>
Name of the interface on which OSPF runs.
<ip-address>
IP address of the interface on which OSPF runs.