Show ip ospf interface, Command mode, Description – Avaya P580 User Manual
Page 408: Syntax, Sample output, Systems, Show ip ospf interface -32
Chapter 19
19-32
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
show ip ospf interface
Command Mode
User.
Description
Displays the OSPF-related interface information.
Syntax
show ip ospf interface [<interface-name>]
Sample Output
The following command displays the OSPF-related information for
interface intf5.
>
show ip ospf interface intf5
Ethernet intf5 is up, line protocol is up
Internet Address 10.0.5.45, Mask 255.255.255.0,
Area 0.0.0.0
AS Router ID 45.0.0.0
Network Type BROADCAST, COST 1
State BACKUP-DR, Priority 1
DRId 43.0.0.0, IpAddress 10.0.5.43
BDR ipAddress 10.0.5.45
Timer Intervals Configured:
Hello 10
Dead 40
wait 40
Retransmit 5
Transit 1
Neighbor count 1, Adjacent Neighbor count 1
Adjacent with neighbor 43.0.0.0 neighbor’s ipaddr
10.0.5.43
Systems
P550R, P580, P880, and P882.
Table 19-22. Parameters, Keywords, Arguments
Name
Definition
<interface-name>
The OSPF interface name.