Show ip ospf virtual-links, Command mode, Description – Avaya P580 User Manual
Page 411: Syntax, Sample output, Systems, Show ip ospf virtual-links -35
Advertising
Document No. 10-300090, Issue 1
19-35
OSPF
show ip ospf virtual-links
Command Mode
User.
Description
Displays parameters that explain the current state of OSPF virtual links.
Syntax
show ip ospf virtual-links
Sample Output
The following command displays parameters about the current state of the
virtual links to the switch.
(configure)#
show ip ospf virtual-link
Virtual link to router 43.0.0.0 is up
Transit area 1.0.0.0 via interface, Cost of using 1
Transit Delay is 1 seconds
Timer Intervals Configured:
Hello 10
Dead 40
wait 40
Retransmit 5
Transit 1
Systems
P550R, P580, P880, and P882.
Advertising
This manual is related to the following products: