Timers spf, Command mode, Description – Avaya P580 User Manual
Page 413: Syntax, Sample output, Systems, Timers spf -37
Advertising
Document No. 10-300090, Issue 1
19-37
OSPF
timers spf
Command Mode
Global Configuration.
Description
Configures the delay time (seconds) between runs of OSPF’s SPF
calculation. Use the no form of this command to restore the default (3
seconds). The valid range is 3 to 65535.
Syntax
Sample Output
The following command sets the spf holdtime to 60 seconds.
(configure)#
timers spf 60
Systems
P550R, P580, P880, and P882.
To Configure:
timers spf <spf-holdtime>
To Restore Default:
[no] timers spf
Table 19-25. Parameters, Keywords, Arguments
Name
Definition
<spf-holdtime>
The time in seconds of the delay between runs of OSPF’s SPF
calculation. The range is:
minimum - 3
maximum - 65535
Advertising
This manual is related to the following products: