Avaya P580 - Manual (Page 43)

Document No. 10-300090, Issue 1 3-3
Appletalk
appletalk access-list
Command Mode Global Configuration.
Description Creates an Appletalk Access List. The no form of this command removes an
Appletalk Access List. The default is to permit all zones and all NBP
objects.
The access list applies to either an Appletalk zone name or to the object
portion of an NBP entity. To delete a zone from the zone list, delete the
static route first.
Syntax
To Enable: appletalk access-list <access-list-number> {deny |
permit} { {nbp | zone} <string> | additional-zones |
additional-nbps}
To Disable: [no] appletalk access-list <access-list-number>
Table 3-2. Parameters, Keywords, Arguments
Name Definition
<access-list-number> The identifier (in decimal) of the access list.
The access-list-number for nbp must be between 600
and 631.
The access-list-number for zone must be between 632
and 663.
deny Prevents access when conditions match. Specifying
deny denies access if the conditions are matched.
permit Allows access when conditions match. Specifying
permit permits access if the conditions are matched.
nbp Applies the access-list to the <string> field of
Appletalk Naming Binding Protocol (NBP) entities.
zone Applies the access-list to Appletalk Zone names.
<string> The name of the zone or NBP object to which this entry
applies.
1 of 2