Set port auto-negotiation-duplex-advertisement, Command mode, Description – Avaya P580 User Manual
Page 440: Syntax, Sample output, Systems, Set port auto-negotiation-duplex-advertisement -8
Chapter 21
21-8
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port auto-negotiation-duplex-advertisement
Command Mode
Global Configuration.
Description
Configures auto negotiation advertisement of the duplex capability for a
specified port or ports.
Syntax
set port auto-negotiation-duplex-advertisement {<mod-num> | <mod-port-
range>}[...,{<mod-num> | <mod-port-range>}] {full/half-duplex | half-
duplex}
Sample Output
The following example sets the auto-negotiation advertisement of the
duplex capability to full or half-duplex mode for the second fast ethernet
port and ports 7 through 11 on the module in slot 5.
(configure)#
set port auto-negotiation-duplex-advertisement 5/2,5/
7-11 full/half duplex
Port auto-negotiation duplex advertisement set:
5/2,5/7,5/8,5/9,5/10,5/11
Systems
P550R, P580, P880, and P882.
Table 21-6. Parameters, Keywords, Arguments
Name
Definition
<mod-num>
Specifies the number of the module where auto negotiation
and advertisement of the duplex capability for every fast
ethernet port on that module is set to support full or half
duplex operations, or just half duplex operations.
<mod-port-range>
Specifies a range of fast ethernet port whose ability for
auto negotiation and advertisement of their duplex
capability is set to support full or half duplex operations or
just half duplex operations.
{full/half-duplex |
half-duplex}
Configure the duplex type of a port or range of ports.
full/half duplex - Specifies that full- or half-duplex modes
may be supported.
half-duplex - Specifies that half-duplex mode is the only
mode supported.