Set port category, Command mode, Description – Avaya P580 User Manual
Page 444: Syntax, Sample output, Systems, Set port category -12, E the, Comma
Chapter 21
21-12
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port category
Command Mode
Global Configuration.
Description
Sets the category of ports.
Syntax
set port category {<mod-num> | <mod-port-range>}[...,{<mod-num> |
<mod-port-range>}] {service-port | user-port}
Sample Output
The following example sets the category of all the ports on the module in
slot 3 and ports 7 through 11 on the module in slot 5 as user ports.
(configure)#
set port category 3,5/7-11 user-port
Port category set: 3/1,3/2,5/7,5/8,5/9,5/10,5,11
Systems
P550R, P580, P880, and P882.
Table 21-10. Parameters, Keywords, Arguments
Name
Definition
<mod-num>
Specifies the number of the module where the port category
type of every module is set.
<mod-port-
range>
Specifies a range of ports whose category is to be set.
{service-port |
user-port}
• service-port - Indicates that the specified ports are set
as service ports and intended for connections to servers
or other switches.
• user-port - Indicates that the specified ports are set as
user ports and intended for connections to end user
nodes.