Set port duplex, Command mode, Description – Avaya P580 User Manual
Page 446: Syntax, Sample output, Systems, Set port duplex -14
Chapter 21
21-14
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port duplex
Command Mode
Global Configuration.
Description
Sets the duplexity of fast ethernet ports.
Syntax
set port duplex {<mod-num> | <mod-port-range>}[...,{<mod-num> |
<mod-port-range>}] {full-duplex | half-duplex}
Sample Output
The following example sets fast ethernet ports 7 through 11 on the module
in slot 5 to full duplex mode.
(configure)#
set port duplex 5/7-11 full-duplex
Port duplex mode set: 5/7,5/8,5/9,5/10,5/11
Systems
P550R, P580, P880, and P882.
Table 21-12. Parameters, Keywords, Arguments
Name
Definition
<mod-num>
Specifies the number of the module where the duplexity of
every fast ethernet port is set.
<mod-port-range>
Specifies a range of fast ethernet ports whose duplexity is
to be set.
{full-duplex | half-
duplex}
Configure the duplex type of a port or range of ports.
• full duplex - The duplexity of the port is set to full
duplex.
• half duplex - The duplexity of the port is set to half
duplex.