Avaya P580 - Manual (Page 45)

Document No. 10-300090, Issue 1 3-5
Appletalk
appletalk address
Command Mode Interface Configuration.
Description Configure an Appletalk Phase I Address for an interface. The no form of
this command removes the Appletalk interface itself.
Syntax
Systems P550R, P580, P880, and P882.
To Enable: appletalk address <network.node>
To Disable: [no] appletalk address
Table 3-3. Parameters, Keywords, Arguments
Name Definition
<network.node> • network - A 16-bit network number between 0 and
66279.
• node - An 8-bit node number between 0 and 254.
Separate the network and node values with a period. When
omitted, the Appletalk address defaults to 0.0.