Set port rate-limit-burst-size, Command mode, Description – Avaya P580 User Manual
Page 466: Syntax, Sample output, Systems, Set port rate-limit-burst-size -34
Chapter 21
21-34
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port rate-limit-burst-size
Command Mode
Global Configuration.
Description
Sets the rate limit burst size for fast ethernet ports.
* Note:
Setting this parameter on any M5548-100TX port sets all
physical ports on the module to the same value.
Syntax
set port rate-limit-burst-size {<mod-num> | <mod-port-range>}
[...,{<mod-num> | <mod-port-range>}] {1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256
| 512 | 1024 | 2048}
Sample Output
The following example sets the rate limit burst size for the second fast
ethernet port and ports 7-11 on the module in slot 5 to 512.
(configure)#
set port rate-limit-burst-size 5/2,5/7-11 512
Port rate limit burst size set: 5/2,5/7,5/8,5/9,
5/10,5/11
Systems
P550R, P580, P880, and P882.
Table 21-29. Parameters, Keywords, Arguments
Name
Definition
<mod-num>
Specifies the number of the module where the rate limit burst
size for each fast ethernet port on the module is to be set.
<mod-port-range>
Specifies the range of fast ethernet where the rate limit burst
size is to be set.
{1 | 2 | 4 | 8 | 16 | 32 |
64 | 128 | 256 | 512 |
1024 | 2048}
The rate limit burst size options.