Avaya P580 - Manual (Page 472)

Chapter 21
21-40 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port spanning-tree-mode
Command Mode Global Configuration.
Description Enables or disables spanning tree mode for specified switch ports.
Syntax
Sample Output The following example enables the spanning tree mode for the second
switch port on the module in slot 3 and switch port 7 through 11 on the
module in slot 5 of an Avaya Multiservice Switch.
(configure)# set port spanning-tree-mode 3/2,5/7-11 enable
Port spanning-tree-mode set: 3/2,5/7,5/8,5/9,
5/10,5/11
Systems P550R, P580, P880, and P882.
To Enable: set port spanning-tree-mode {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] enable
To
Disable: set port spanning-tree-mode {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] disable
Table 21-34. Parameters, Keywords, Arguments
Name Definition
<mod-num> Specifies the number of the module where the spanning
tree mode is to be enabled or disabled for every switch
port on the module.
<mod-swport-
range> Specifies a range of switch ports whose spanning tree
mode is to be enabled or disabled.