Set port vtp-snooping, Command mode, Description – Avaya P580 User Manual
Page 477: Syntax, Sample output, Systems, Set port vtp-snooping -45
Document No. 10-300090, Issue 1
21-45
Port
set port vtp-snooping
Command Mode
Global Configuration.
Description
Disables or enables vtp-snooping for specified switch ports. The default
state is disabled.
Syntax
Sample Output
The following example enables the vtp-snooping option for the second
switch port on the module in slot 3 and switch ports 7 through 11 on the
module in slot 5.
(configure)#
set port vtp-snooping 3/2,5/7-11 enable
Port vtp-snooping set: 3/2,5/7,5/8,5/9,5/10,5/11
Systems
P550R, P580, P880, and P882.
To Enable:
set port vtp-snooping {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] enable
To Disable:
set port vtp-snooping {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}] disable
Table 21-39. Parameters, Keywords, Arguments
Name
Definition
<mod-num>
Specifies the number of the module.
<mod-swport-range>
Specifies a particular port or a range of ports on a
module.