Show port, Command mode, Description – Avaya P580 User Manual
Page 478: Syntax, Sample output, Systems, Show port -46
Chapter 21
21-46
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
show port
Command Mode
User.
Description
Displays the configuration of specified switch ports. By default, the
configuration of all switch ports is displayed.
Syntax
show port [{<mod-num> | <mod-swport-range>}[...,{<mod-num> |
<mod-swport-range>}]]
Sample Output
The following example displays the configuration information of port 3
(partial).
>
show port 3
Port
Port VLAN
Trunk Mode
VLAN Binding
(ID:Name)
-----
---------
-----------
-------------
3/1
1:Default
clear
static
3/2
1:Default
clear
static
Systems
P550R, P580, P880, and P882.
Table 21-40. Parameters, Keywords, Arguments
Name
Definition
<mod-num>
Specifies the number of the module where the
configuration of every switch port is to be displayed.
<mod-swport-range>
Specifies a range of ports on a module whose
configuration is to be displayed.