Set diffserv priority, Command mode, Description – Avaya P580 User Manual
Page 504: Syntax, Sample output, Systems, Set diffserv priority -16
Chapter 23
23-16
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set diffserv priority
Command Mode
Global Configuration.
Description
Assigns a priority to a DiffServ code point (DSCP) in the DiffServ Mapping
Table.
Syntax
set diffserv priority <priority> dscp <dscp-start-range> [<dscp-end-
range>]
Sample Output
The following command sets a priority of 7 to DSCPs 15 through 63.
(configure)#
set diffserv priority 7 dscp 15 63
Systems
■
P550R and P880, 80-series modules only.
■
P580 and P882.
Table 23-8. Parameters, Keywords, Arguments
Name
Definition
<priority>
The priority that you want to assign. Enter a
number between 0 and 7.
<dscp-start-range>
The first DSCP in the range of DSCPs that
you want to assign the priority to. DSCPs
range from 0 to 63.
[<dscp-end-range>]
The last DSCP in the range of DSCPs that you
want to assign the priority to. DSCPs range
from 0 to 63.