Show port queue buffer, Command mode, Description – Avaya P580 User Manual
Page 523: Syntax, Sample output, Systems, Show port queue buffer -35
Document No. 10-300090, Issue 1
23-35
80-Series QoS
show port queue buffer
Command Mode
User.
Description
Displays the amount of memory that is assigned to each queue.
Syntax
show port queue buffer {{<mod-num> | <mod-swport-range>}[..., {<mod-
num> | <mod-swport-range>}] | all-ports}
Sample Output
The following example displays the amount of memory that is assigned to
all ports on the module in slot 3.
>
show port queue buffer 3 all-ports
Systems
■
P550R and P880, 80-series modules only.
■
P580 and P882.
Table 23-20. Parameters, Keywords, Arguments
Name
Definition
<mod-num>
The slot number of a module. the switch displays the
number of packet buffers that are allocated to the egress
queues on all ports on the module that you specify.
<mod-swport-range>
The slot number of a module, and, either a port number,
or a range of port numbers having the format Px-Py.
For example:
• To specify port 1 on the module in slot 3, enter 3/
1.
• To specify ports 1 through 5 on the module in
slot 3, enter 3/1-5.
The switch displays the number of packet buffers that
are allocated to the egress queues on the port or range
of ports that you specify.
{all-ports}
All ports in the chassis. The switch displays the number
of packet buffers that are allocated to the egress queues
on all ports in the chassis.