Avaya P580 - Manual (Page 529)

Document No. 10-300090, Issue 1 24-3
RADIUS
set radius authentication group
Command Mode Global Configuration.
Description Sets the group to which the switch belongs. If a group is set, then the group
name is included in Access Request messages that are sent to the RADIUS
server. By default, the switch does not belong to a group.
The group name can be 22 alpha characters.
Syntax
Sample Output The following command assigns the switch to group avaya switches:
(configure)# set radius authentication group avaya switches
The following command clears the group membership of the switch:
(configure)# clear radius authentication group
Systems P550R, P580, P880, and P882.
To Configure: set radius authentication group <group>.
To Clear: clear radius authentication group
Table 24-1. Parameters, Keywords, Arguments
Name Definition
<group> The group to which the switch belongs. The group name can be 22
characters.