Avaya P580 - Manual (Page 53)

Document No. 10-300090, Issue 1 3-13
Appletalk
appletalk vlan
Command Mode Interface Configuration.
Description Assigns the Appletalk interface to a VLAN. The no form of this command
resets the VLAN to the discard VLAN, which is the default value.
Syntax
Sample Output The following example sets Appletalk interface foo2 to VLAN auto50.
(config-if:auto50)# appletalk vlan name foo2
Systems P550R, P580, P880, and P882.
To Enable: appletalk vlan {<vlan-id> | name <vlan-name>}
To Disable: [no] appletalk vlan
Table 3-9. Parameters, Keywords, Arguments
Name Definition
<vlan-id> The ID of the VLAN Appletalk uses for the interface.
<vlan-name> The name of the VLAN Appletalk uses for the interface.