Set radius authentication retry-number, Command mode, Description – Avaya P580 User Manual
Page 531: Syntax, Sample output, Systems, Set radius authentication retry-number -5
Document No. 10-300090, Issue 1
24-5
RADIUS
set radius authentication retry-number
Command Mode
Global Configuration.
Description
Sets the number of times the switch attempts to contact the RADIUS server
to authenticate a user. The default value is 1 retry and the valid range is 0 to
10 retries.
Syntax
set radius authentication retry-number <retry-number>
Sample Output
The following command sets the number of authentication retries to 4:
(configure)#
set radius authentication retry-number 4
Systems
P550R, P580, P880, and P882.
Table 24-3. Parameters, Keywords, Arguments
Name
Definition
<retry-
number>
The number of times to resend the Access Request message if the
RADIUS server does not respond. The default value is 1 retry and the
valid range is 0 to 10 retries.