Set radius authentication retry-time, Command mode, Description – Avaya P580 User Manual
Page 532: Syntax, Sample output, Systems, Set radius authentication retry-time -6
Chapter 24
24-6
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set radius authentication retry-time
Command Mode
Global Configuration.
Description
Sets the amount of time in seconds that the switch waits before attempting
to reauthenticate a login. The default value is 7 seconds and the valid range
is 1 to 30 seconds.
Syntax
set radius authentication retry-number <retry-time-in-seconds>
Sample Output
The following command sets the retry time to 10 seconds:
(configure)#
set radius authentication retry-time 10
Systems
P550R, P580, P880, and P882.
Table 24-4. Parameters, Keywords, Arguments
Name
Definition
<retry-
time-in-
seconds>
The amount of time in seconds that the switch waits before
attempting to reauthenticate a login. The default value is 7 seconds
and the valid range is 1 to 30 seconds.