Set radius authentication server, Command mode, Description – Avaya P580 User Manual
Page 533: Syntax, Sample output, Systems, Set radius authentication server -7
Document No. 10-300090, Issue 1
24-7
RADIUS
set radius authentication server
Command Mode
Global Configuration.
Description
Sets either the primary or secondary RADIUS server settings.
Syntax
Sample Output
The following command sets the primary RADIUS server to IP address
192.157.1.0 and shared secret to secret primary.
(configure)#
set radius authentication server 192.157.1.0 secret
primary
Systems
P550R, P580, P880, and P882.
To Configure:
set radius authentication server <ip-addr> <shared-
secret> [encrypted-type1] [{primary | secondary}]
To Clear:
clear radius authentication server [{primary |
secondary}]
Table 24-5. Parameters, Keywords, Arguments
Name
Definition
<ip-addr>
IP Address of the RADIUS server.
<shared-secret>
Case sensitive shared secret. This must be exactly the same
as on the RADIUS server. Spaces are not allowed.
[encrypted-type1]
Do not use this option. This option is used by the switch
when saving passwords in the startup.txt file.
[{primary |
secondary}]
Specifies that the settings be applied to the primary or
secondary RADIUS server. If omitted, the command
applies to the primary RADIUS server.