Snmp-server contact, Command mode, Description – Avaya P580 User Manual
Page 543: Syntax, Systems, Snmp-server contact -5
Advertising
Document No. 10-300090, Issue 1
25-5
SNMP
snmp-server contact
Command Mode
Global Configuration.
Description
Sets the administrative contact for the switch. The switch displays the
administrative contact when you enter the show snmp command. The
default setting is System Administrator. The no command restores the
default setting.
Syntax
Systems
P580 and P882.
To Configure:
snmp-server contact <contact-name>
To Restore
Default:
no snmp-server contact
Table 25-3. Parameters, Keywords, Arguments
Parameter
Definition
<contact-name>
The name of the administrative contact for the switch.
The contact name can range from 1 to 127 characters.
Advertising
This manual is related to the following products: