Snmp-server notify, Command mode, Description – Avaya P580 User Manual
Page 548: Syntax, Systems, Snmp-server notify -10
Advertising
Chapter 25
25-10
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
snmp-server notify
Command Mode
Global Configuration.
Description
Sets the trap receiver for a community string. The no command clears the
trap receiver
Syntax
Systems
P580 and P882.
To Configure:
snmp-server notify <ip-addr> <community-string>
To Clear:
no snmp-server notify <ip-addr> <community-string>
Table 25-7. Parameters, Keywords, Arguments
Parameter
Definition
<ip-addr>
The IP address to which you want trap messages sent.
<community-string>
The existing community string for which you are
setting the trap receiver.
Advertising
This manual is related to the following products: