Snmp-server user, Command mode, Description – Avaya P580 User Manual
Page 550: Syntax, Snmp-server user -12
Chapter 25
25-12
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
snmp-server user
Command Mode
Global Configuration.
Description
Creates or modifies an SNMPv3 user. The no command deletes an
SNMPv3 user.
Syntax
To Configure:
snmp-server user <username> [group <groupname>]
[ [localized] auth {sha | md5} <auth-password>
[priv <priv-password>] ]
To Delete:
no snmp-server user <username>
Table 25-9. Parameters, Keywords, Arguments
Parameter
Definition
<username>
User name for the SNMPv3 user. The user name can
range from 1 to 32 alphanumeric characters.
Important:
Do not assign a community string and
SNMPv3 user the same name.
<groupname>
Name of the group to which you are assigning the user.
localized
Use this keyword if you want to enter the authentication
password and privacy password in their localized form
instead of text.
Localized passwords consist of the engine ID plus the
password and are then hashed by either HMAC-SHA or
HMAC-MD5.
sha
Authenticates the user by means of HMAC-SHA.
md5
Authenticates the user by means of HMAC-MD5.
1 of 2