Snmp-server view, Command mode, Description – Avaya P580 User Manual
Page 552: Syntax, Systems, Snmp-server view -14
Chapter 25
25-14
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
snmp-server view
Command Mode
Global Configuration.
Description
Creates or modifies a MIB view. The no command deletes a view or
removes an OID from a view.
Syntax
Systems
P580 and P882.
To Configure:
snmp-server view <viewname> <OIDST> [{included |
excluded}]
To Delete:
no snmp-server view <viewname> [<OIDST>]
Table 25-10. Parameters, Keywords, Arguments
Parameter
Definition
<viewname>
The name of the view that you want to create or
modify. The view name can range from 1 to 32
alphanumeric characters.
<OIDST>
The object identifier (OID) for the object that you want
to either include or exclude from the view.
You must enter the numeric OID. Use the wildcard
character * to specify a sub-tree family.
If used in the no command, the OID is removed from
the view.
{included | excluded}
Specifies whether the object is included or excluded
from the view.