Avaya P580 - Manual (Page 587)

Document No. 10-300090, Issue 1 28-9
Rapid Spanning Tree Protocol
set spantree
Command Mode Global Configuration.
Description Enable or disable individual spanning tree bridges. The default state is
enabled.
Syntax
To Enable: set spantree enable {802.1D | vlan {<vlan-id> | name
<vlan-name>}}
To Disable: set spantree disable {802.1D | vlan {<vlan-id> | name
<vlan-name>}}
Table 28-6. Parameters, Keywords, Arguments
Name Definition
enable Enables the bridge.
disable Disables the bridge.
802.1D Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE 802.1D
Spanning Tree, see Chapter 7, “Configuring Rapid Spanning
Tree,” in User Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.
<vlan-id> The VLAN ID of the bridge.
Use the vlan <vlan-id> keyword and variable when the
switch is running per-VLAN or dual-layer Spanning Tree.
For a detailed description of per-VLAN and dual-layer
Spanning Tree, see Chapter 7, “Configuring Rapid Spanning
Tree,” in User Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1
<vlan-name> The VLAN name of the bridge.
Use the vlan name <vlan-name> keyword and variable
when the switch is running per-VLAN or dual-layer
Spanning Tree. For a detailed description of per-VLAN and
dual-layer Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1