Avaya P580 - Manual (Page 594)

Chapter 28
28-16 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set spantree hello
Command Mode Global Configuration.
Description Sets the spanning tree bridge hello time. The bridge hello time is the time
between generation of BPDUs by the root bridge.The default time is 2
seconds.
Syntax set spantree hello <hellotime-value> {802.1D | vlan {<vlan-id> | name
<vlan-name>}}
Sample Output The following example sets the spanning tree hello time to 5 seconds:
(configure)# set spantree hello 5 802.1D
Bridge Hello Time Successfully set to 5
Systems P550R, P580, P880, and P882.
Table 28-10. Parameters, Keywords, Arguments
Name Definition
<hellotime-value> The hello time value for the bridge, in seconds. The ranges
is 1-10 seconds. The default setting is 2 seconds.
802.1D Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE 802.1D
Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1.
<vlan-id> The VLAN ID of the bridge.
Use the vlan <vlan-id> keyword and variable when the
switch is running per-VLAN or dual-layer Spanning Tree.
For a detailed description of per-VLAN and dual-layer
Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1
<vlan-name> The VLAN name of the bridge.
Use the vlan name <vlan-name> keyword and variable
when the switch is running per-VLAN or dual-layer
Spanning Tree. For a detailed description of per-VLAN and
dual-layer Spanning Tree, see Chapter 7, “Configuring
Rapid Spanning Tree,” in User Guide for the Avaya P580
and P882 Multiservice Switches, Software Version 6.1