Avaya P580 - Manual (Page 601)

Document No. 10-300090, Issue 1 28-23
Rapid Spanning Tree Protocol
set spantree priority
Command Mode Global Configuration.
Description Sets the bridge priority for a particular bridge. Enter the priority as
hexidecimal value.
The valid range for this field is 0x0000 (0) to 0xF000 (61,440) in
increments of 0x1000 (4,096). The default setting is 0x8000 (32,768).
* Note: When you upgrade the switch to v6.0 application software, all
bridge priorities are reset to the default setting of 0x8000.
Bridge priorities from earlier versions of software are not
preserved.
Syntax set spantree priority <bridge-priority> {802.1D | vlan {<vlan-id> | name
<vlan-name>}}
Table 28-14. Parameters, Keywords, Arguments
Name Definition
<bridge-priority> The bridge priority, specified as a two byte value in
hexidecimal (0x8000).
The valid range for this field is 0x0000 (0) to 0xF000
(61,440) in increments of 0x1000 (4,096). The default
setting is 0x8000 (32,768).
802.1D Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE
802.1D Spanning Tree, see Chapter 7, “Configuring
Rapid Spanning Tree,” in User Guide for the Avaya
P580 and P882 Multiservice Switches, Software
Version 6.1.
1 of 2