Set fabric enable-redundant-element, Command mode, Description – Avaya P580 User Manual
Page 613: Syntax, Systems, Set fabric enable-redundant-element -3
Document No. 10-300090, Issue 1
29-3
Switch Fabric
set fabric enable-redundant-element
Command Mode
Global Configuration.
Description
Sets the enabled redundant element.
This command does not have reverse mapping. It is not saved to the running
or startup configuration file. The configuration is both user and run-time
modified.
Syntax
set fabric enable-redundant-element {normal | 1 | 2 | 3 | 4 | 5 | 6}
* Note:
This command is for debug purposes only and is not
recommended for use in a production environment.
Systems
P550R, P580, P880, and P882.
Table 29-1. Parameters, Keywords, Arguments
Name
Definition
{normal | 1 | 2 |
3 | 4 | 5 | 6}
Required parameter.
• Normal means that the normally enabled redundant
element is turned on.
• 1-6 means that element associated with the number is
turned on.