Show appletalk static cable-range, Command mode, Description – Avaya P580 User Manual
Page 65: Syntax, Sample output, Systems, Show appletalk static cable-range -25
Advertising
Document No. 10-300090, Issue 1
3-25
Appletalk
show appletalk static cable-range
Command Mode
User.
Description
Displays the static routes that are configured for Appletalk.
Syntax
show appletalk static cable-range [<starting-range>]
Sample Output
The following example displays all of the Appletalk static routes that are
configured.
> show appletalk static cable-range
AppleTalk StaticRoute Table
Start-End Next Hop Metric State Owner Interface
9000-9001 350.50 1 Good Static at_if1
Systems
P550R, P580, P880, and P882.
Table 3-17. Parameters, Keywords, Arguments
Name
Definition
<starting-
range>
If the starting range is supplied, the entry corresponding to this
specific static route is displayed; otherwise, the entire routing
table is displayed.
Advertising
This manual is related to the following products: