Set buffering fabric-port (hipri-alloc), Command mode, Description – Avaya P580 User Manual
Page 71: Syntax, Sample output, Systems, Set buffering fabric-port (hipri-alloc) -3
Document No. 10-300090, Issue 1
4-3
Buffering
set buffering fabric-port (hipri-alloc)
Command Mode
Global Configuration.
Description
Set the input or output buffer high priority allocation percentage. The
default percentage value is 20%.
* Note:
The switch must be rebooted for changes to this parameter to
take effect.
Syntax
set buffering fabric-port <fabric-port-spec> [routing] {input | output} hipri-
alloc {10 | 20 | 30 | 40 | 50}
Sample Output
The following example sets the buffer high priority allocation percentage
for fabric port 4/1 to 30%.
(configure)#
set buffering fabric-port 4/2 routing output hipri-
alloc 30
Buffers for fabric-port 4/2 set.
Systems
P550R, P580, P880, and P882.
Table 4-2. Parameters, Keywords, Arguments
Name
Definition
<fabric-port-spec>
Enter a particular fabric port or a range of fabric ports on
a module.
[routing]
Set the routing buffer parameters.
{input | output}
Input or output buffering.
hipri-alloc
The high priority allocation percentage values are: 10,
20, 30, 40, or 50.