Set buffering fabric-port (hipri-service-ratio), Command mode, Description – Avaya P580 User Manual
Page 72: Syntax, Sample output, Systems, Set buffering fabric-port (hipri-service-ratio) -4
Chapter 4
4-4
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set buffering fabric-port (hipri-service-ratio)
Command Mode
Global Configuration.
Description
Sets the input or output buffer high priority service ratio for a fabric port.
The default ratio is 999-to-1.
Syntax
set buffering fabric-port <fabric-port-spec> [routing] {input | output} hipri-
service-ratio {3-to-1 | 99-to-1 | 999-to-1 | 9999-to-1}
Sample Output
The following example sets the input buffer high priority service ratio for
fabric port 4/1 to 9999-to-1.
(configure)#
set buffering fabric-port 4/1 routing input hipri-
service-ratio 9999-to-1
Buffers for fabric-port 4/1 set.
Systems
P550R, P580, P880, and P882.
Table 4-3. Parameters, Keywords, Arguments
Name
Definition
<fabric-port-
spec>
Enter a particular fabric port or a range of fabric ports on a
module.
[routing]
Set the routing buffer parameters.
{input | output}
Input or output buffering.
hipri-service-ratio
The high priority service ratios are: 3-to-1, 99-to-1, 999-to-
1, 9999-to-1