Set buffering fabric-port (pri-threshold), Command mode, Description – Avaya P580 User Manual
Page 73: Syntax, Sample output, Systems, Set buffering fabric-port (pri-threshold) -5
Document No. 10-300090, Issue 1
4-5
Buffering
set buffering fabric-port (pri-threshold)
Command Mode
Global Configuration.
Description
Sets the input or output buffer priority threshold for a fabric port. The
default value for the priority threshold is 4.
Syntax
set buffering fabric-port <fabric-port-spec> [routing] {input | output} pri-
threshold {1 | 2 | 3 | 4 | 5 | 6 | 7 | all-frames-normal-priority}
Sample Output
The following example sets the buffer priority threshold for fabric port 4/1
to 5.
(configure)#
set buffering fabric-port 4/1 routing output pri-
threshold 5
Buffers for fabric-port 4/1 set.
Systems
P550R, P580, P880, and P882.
Table 4-4. Parameters, Keywords, Arguments
Name
Definition
<fabric-port-
spec>
Enter a particular fabric port or a range of fabric ports on a
module.
[routing]
Set the routing buffer parameters.
{input | output}
Input or output buffering.
pri-threshold
The priority thresholds are:
1, 2, 3, 4, 5, 6, 7 or all-frames-normal-priority