Set vlan, Command mode, Description – Avaya P580 User Manual
Page 733: Systems, Set vlan -3
Document No. 10-300090, Issue 1
33-3
VLAN
set vlan
Command Mode
Global Configuration.
Description
Creates a VLAN or modifies the name of an existing VLAN. The clear
command deletes a VLAN.
If the VLAN that you specify does not exist, this command creates the
VLAN. If the VLAN that you specify does exist, this command renames the
VLAN and ignores any optional arguments that you enter.
Systems
P550R, P580, P880, and P882.
To Configure:
set vlan <vlan-id> [name <vlan-name>] [autoincrement-
HT-size {true | false}] [init-HT-size <size>]
To Delete:
clear vlan {<vlan-id> | name <vlan-name>}
Table 33-2. Parameters, Keywords, Arguments
Name
Definition
<vlan-id>
The VLAN ID.
[name <vlan-name>]
The VLAN name.
[autoincrement-HT-
size {true | false}
Specifies whether the AFT hash table associated with this
VLAN can grow when the table is full. The default setting
is true.
[init-HT-size <size>]
Specifies the initial hash table size. The table size can be
16, 32, 64, 128, 256, 512, 1024, 2048, 4096 or 8192. The
default setting is 1024.