Show 3com-mapping-table, Command mode, Description – Avaya P580 User Manual
Page 738: Syntax, Sample output, Systems, Show 3com-mapping-table -8
Chapter 33
33-8
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
show 3com-mapping-table
Command Mode
User.
Description
Displays the 3Com mapping tables. All tables are displayed by default.
Syntax
show 3com-mapping-table [<table-name>]
Sample Output
The following example shows the 3Com Mapping Table for the switch.
>
show 3com-mapping-table
Systems
P550R, P580, P880, and P882.
Table 33-6. Parameters, Keywords, Arguments
Name
Definition
[<table-name>]
The name of the 3Com mapping table. If not included, this
command will display all of the tables configured on the
switch.
------------------------------------------------------------------------------------
Table Name: “3ComDefault”
Table Entries: [entry num: vlan name (vlan id)]
1: Default (1 )
2:Discard (4097)
3: Discard (4097)
4:Discard(4097)
5: Discard (4097)
6: Discard (4097)
7: Discard (4097)
8: Discard(4097)
9: Discard (4097)
10:Discard (4097)
11: Discard(4097)
12: Discard(4097)
13: Discard (4097)
14:Discard(4097)
15:Discard (4097)
16: Discard(4097)
------------------------------------------------------------------------------------