Ip vrrp (priority), Command mode, Description – Avaya P580 User Manual
Page 748: Syntax, Sample output, Systems, Ip vrrp (priority) -8
Chapter 34
34-8
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip vrrp (priority)
Command Mode
Interface Configuration.
Description
Sets the virtual router priority value for the virtual router ID. Use the no
form of this command to restore the default value of 100.
Syntax
Sample Output
The following example sets the priority value for virtual router 1 to 254 on
an interface labeled boston.
(config-if:boston)#
ip vrrp 1 priority 254
Systems
P550R, P580, P880, and P882.
To Configure:
ip vrrp <vr-id> priority <priority-value>
To Restore Default:
[no] ip vrrp <vr-id> priority
Table 34-5. Parameters, Keywords, Arguments
Name
Definition
<vr-id>
Virtual router ID.
<priority-value>
The priority value. The range is 1 - 254. 100 is the default
value.