Set console flowcontrol, Command mode, Description – Avaya P580 User Manual
Page 84: Syntax, Sample output, Systems, Set console flowcontrol -4
Advertising
Chapter 5
5-4
Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set console flowcontrol
Command Mode
Global Configuration.
Description
Sets the flow control type for the serial console port. The default for both
TTY and PPP is xon/xoff.
Syntax
set console flowcontrol {none | xon/xoff}
Sample Output
This example sets the console flow control to none.
(configure)#
set console flowcontrol none
Systems
P550R, P580, P880, and P882.
Table 5-3. Parameters, Keywords, Arguments
Name
Definition
{none | xon/xoff}
This is a required parameter. Indicates either the lack of
use of flow control, or that the software based xon/xoff
flow control is in use.
Advertising
This manual is related to the following products: