IntelliTrack Package Track - Manual (Page 172)

I NTELLI T RACK DMS: P ACKAGE T RACK V 7.0
User Manual
156
data configuration parameters and send downloaded data to the Batch Por-
table Application, please follow the steps below.
1. From the DMS Batch Synchronization Utility, click the Send Data tab
in the Main form to bring this portion of the form to the front.
2. The tracking number format, carrier, delivery status, location, user,
mailroom, package, package type, recipient, signature, and security
information is automatically sent to the batch portable application. If
you have enabled password security in the Options form in the work-
station application, the Security Enabled check box is enabled. Mark
the Security Enabled check box to send password security to the hand-
held application.
3. If you want to send all packages in the system to the batch portable
application, leave the default setting All in the Send Packages By
field. Package data that is sent to the handheld device may be limited
by the following parameters:
Note: All list data follows an alphanumeric sort order: symbols, numbers,
letters.
Receive Date: to limit package data by received date, click the drop-
down arrow in the Send Packages By field and select Received Date.
Click the drop-down arrow in the From field to select the beginning
date. Click the drop-down arrow in the To field to select the ending
date.