IntelliTrack Package Track - Manual (Page 189)

Chapter 9
Using the Handheld
173
5. When you are finished receiving packages for the recipient, you may
edit the packages.
• To edit a package in the handheld application, select a package in the
grid area of the screen and tap the Edit button. The Edit Package
screen appears for the selected package. At this screen, you may
assign the carrier, recipient, location, package type, and mailroom
for the package. You are also able to enter a comment about the
package. When you are finished editing the package, tap the ok but-
ton or the Windows CE Close (X) selection to return to the Rapid
Receive screen. Continue editing packages until you are finished.
(For more information about editing a package record, please refer
to
“Editing a Received Package” on page 175 .)
• To edit the rapid receive packages in the workstation application,
please refer to the next section, “Editing the Rapid Receive Packages
in the Workstation Application” on page 173 .
6. To “rapid receive” packages for another recipient, repeat steps 3–5.
7. To exit the Rapid Receive mode, tap the ok button or the Windows CE
Close (X) selection and return to the Main screen.
Editing the Rapid Receive Packages in the Workstation
Application
To quickly assign package information after a “Rapid Receive” session,
consider using the Package Maintenance window in the Package Track
workstation application.
1. After you finished “Rapid Receiving” packages, perform a data syn-
chronization to send the new package data to the desktop computer.
2. Next, click Start > Programs > IntelliTrack > DMS > Package
Track SQL > Package Track SQL workstation to open the Package
Track workstation application.
These packages
were added
during the rapid
receive sequence.