LevelOne HVE-9900 - Manual (Page 10)

9
HVE-9004 HDSpider ™ 4-Port Cat.5 HDMI Sender
DIP Switch: Please see more detail in the table below
HDMI INPUT: Connect to a HDMI source
HDMI Signal OUTPUT 1 – 4: Link to each HDMI display via a Cat.5e/6 cable with HVE-9000,
HVE-9003, or HVE-9900.
USB: For firmware update (technical support use only)
+5V DC: interlocking power jack for 5V DC power supply unit
DIP Switch
DIP Switch Position
Video Audio Description
Pin-1 Pin-2
OFF [©] OFF [©] Up to 1080p Stereo 1
Default Mode 2 – Up to 1080p & stereo audio
output for most HDTVs
OFF [©] ON [ª]
Up to
720p/1080i
Stereo 1
Safe Mode 3 – Enforce the system output at
720p/1080i video and stereo audio for basic
compatibility among HDTV
ON [ª] OFF [©] Bypass 4 Bypass 4
EDID Learning 5 Mode – for learning EDID from
the display while playing any received HDMI
audio format
ON [ª] ON [ª] Bypass 4 Stereo
EDID Learning 5 & Stereo Mode – for learning
EDID from the display while enforcing stereo
output if any HDTV cannot play surround sound
normally