LevelOne HVE-9900 - Manual (Page 15)

14
Extends HDMI signals to one display at longer distance
HVE-9000 & HVE-9001
1. Connect HVE-9001 to a HDMI source device with a HDMI cable.
2. Connect HVE-9000 to a HDMI display or projector with a HDMI cable.
3. Connect a Cat.5e/6 cable between HVE-9000 and HVE-9001.
4. Make sure this Cat.5e/6 cable is tightly connected and not loose.
5. Plug in a 5V DC power supply unit to the power jack of HVE-9000.
6. Plug in another 5V DC power supply unit to the power jack of HVE-9001.
7. If the image on the display is flickering or blinking, adjust the rotary control
switch to improve the cable skew. 0 stands for the strongest HDMI signal level for
longest possible transmission length while 7 stands for the weakest HDMI signal
level for short transmission length. Use a screw driver to adjust the signal level
from 7 to 0 and stop turning the rotary switch whenever the audio/video is
playing normally. Inappropriate signal level setting may cause overpowering
issue that would shorten the product life significantly!
HVE-9000
HDMI cable
HDMI cable
Cat.5e/6 cable
HVE-9001
HDTV
Blu-ray Disc player
INSTALLATION